How to manually configure Windows Server using User Control Panel?

Microsoft had launched a Windows series for server operating system. Windows Server service can automatically set itself, but you can also manually configure it with the use of Control Panel.
Every time you boot Windows, server configuration parameters are automatically configured. However, if you do not want to set Server with the use of Control Panel Networks, then you have to run certain commands so that default parameters are written to the registry.
When you run the command “NET CONFIG SRV /SRVCOMMENT Windows will not change the calculated value of automatically set entries. In this way, it can be said that once you have run the above mentioned command, you become unable to add or remove system memory, or to modify any server size setting.
In case you want to view configuration information about the server, you can use the command “NET CONFIG SERVER.” This command will only display the information without doing any modification. There are some Server service support information levels, which let you configure every parameter individually.
The command “NET CONFIG SRV /HIDDEN” make use of information level 1016 in order to set the hidden parameter. Another command “NET.EXE” queries and sets information levels 102 and 502. After you run the given commands, all the parameters in the information level will set in the registry.
Once the parameters are set in the registry, the commands “SRVMGR.EXE” and the Control Panel Server query will set only level 102. If you are an administrator and want to modify the auto disconnect value, then you should not use the commands mentioned above. You should use “REGEDT32.EXE” for performing some specific modifications.
You can easily modify the server comment with the use of description field of the Control Panel Server applet or Server Manager. In case you want to modify the registry, you have to first take its backup for protection. Follow the given steps for restoring the LAN Manager Server parameters to the defaults, or to reconfigure Windows so that it auto-configures the Server service:
STEP 1: Run Registry Editor (REGEDT32.EXE).
STEP 2: From the HKEY_LOCAL_MACHINE subtree, go to the following key:
\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters
STEP 3: Remove all the entries except the following:
EnableSharedNetDrives
Lmannounce
NullSessionPipes
NullSessionShares
Size
STEP 4: Quit Registry Editor and restart Windows.

Conversion of Primary DNS Server to an Active Directory Integrated Primary Server

Every website on Internet has a unique URL, which locates the website. The URL consist of the domain name, which is converted into the corresponding IP address with the help of DNS server.
You can also convert your Primary DNS server to an Active Directory Integrated Primary server, instead of adding secondary DNS servers. The concept behind adding secondary DNS server is to avoid any failure. With the following steps you can convert Primary DNS Server to Active Directory Integrated Primary server on Windows Server 2003:
STEP 1: On the current DNS server, start DNS Manager.
STEP 2: Right-click a DNS zone, click Properties, click the General tab, and then note the Type value. This will be Primary zone, Secondary zone or Stub zone.
STEP 3: Click Change.
STEP 4: In the Change Zone Type box, click to select the “Store the zone” in Active Directory check box. When you are prompted to answer whether want this zone to become Active Directory integrated, click Yes, and then click OK.
When you complete all the steps, then in the Domain properties, type will be shown as "Active Directory-Integrated". You can supplement other DNS servers in the domain controller after its replication becomes complete. So, in this way you can supplement other DNS servers, which lead to removal of any point of failure.

Remote Support Services

Remote support services are an array of technical services offered through the Internet. Many technical service providers offer remote support for a range of services. Your system should have an Internet connection in order to utilize remote support services.

Services offered through remote support are enlisted below:

· Software installation

· Virus removal

· Windows upgrades

· System tune-up and routine maintenance to speed up the computer

· Configuring settings for e-mail, or Internet, or Microsoft Office

· Removal of spyware applications

· Troubleshooting

· Internet optimization

· Support for peripheral devices

Along with these services, remote support provides you many benefits. Most important benefit is the availability; you can access remote support from anywhere in the world. You do not have to take your system to any service provider, and no need to call someone at your premises.

You just have to contact any technical service provider, and your issue gets resolved. A technician from your service provider will access your system via remote connection. After that, he will diagnose the issue that is not letting your system perform better and fix it simultaneously.

So, it is viable to say that remote support services are much better than traditional services. You just have to pay once and get access to a wide variety of services through remote support.

Windows Server Support

Microsoft had launched a series of server operating systems under the brand name Windows Server. Some of the server operating systems are, Windows Server 2008 R2, Windows Server 2008, Windows Server 2003 R2, Windows Server 2003, Windows 2000 Server and others.
Microsoft offers support for all its products including server operating systems. You can visit Microsoft support website, in case you have any technical issues related to Windows Servers.
You can receive a lot of information related to Windows Servers from Microsoft support website. Some of the issues on which you can receive information are, how to configure an authoritative time server in Windows Server 2008 R2, how to troubleshoot shutdown problems in Windows Server 2003, Windows Server 2003 service pack 1 support tools, how to lock down Windows Server 2003, how to configure Internet printing in Windows Server 2003, how to enable Telnet Server in Windows 2000 Server and many others.
Beside this, you can contact a technical service provider for Windows Server support. Technicians at technical service providers make use of remote connection in order to access your system online. After accessing your system, your issues will be analyzed and resolved. So, you do not have to take pain of inviting a technician at your own place because your issues will be resolved through the Internet.
windows server, windows server 2003, windows server R2, windows server support

How to enable DHCP on Windows 7?

DHCP Server for Windows 7
DHCP (Dynamic Host Configuration Protocol) server offers information about IP address, subnet mask and default gateway to the clients. DHCP server for Windows 7 has been enhanced in many areas like support for SSID caching, optimization for obtaining IP address and others.
Suppose, your Windows 7 computer is connected to an intranet having multiple subnets and the Internet, but having a default gateway for both adapters. In this situation, you can either communicate with all computers on the intranet or Internet, but not with both of them. In order to solve this problem, you have to configure a default gateway with the adapter connected to the Internet. This is where the role of DHCP server comes into play.
In case, you want to configure a default gateway on Windows 7 PC follow the procedure:
STEP 1: Open Network Connections by clicking the Start button, and then clicking Control Panel. In the search box, type adapter, and then, under Network and Sharing Center, click View network connections.
STEP 2: Right-click the network adapter that you want to configure a default gateway for, and then click Properties. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
STEP 3: Click the Networking tab.
STEP 4: Under “This connection uses the following items”, click either Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6), and then click Properties.
STEP 5: In the dialog box that appears, select either “Obtain an IP address automatically” or “Use the following IP address”.
a) If you configure the network adapter to obtain an IP address automatically, the default gateway is assigned by the DHCP server.
b) If you manually specify an IP address configuration, the default gateway is the IP address in the Default gateway box on the General tab
After completing this procedure, you can configure a default gateway on your Windows 7 PC.